share this page: | | QL2 Thermostatic Shower, QL2 Shower Head and Bath Filler
Our Price £563.00 inc VAT
SAVE 34% Usual Price £853.00 This QL2 thermostatic shower delivers a cutting edge design that is sure to make a statement in any contemporary bathroom, not only that the quality is exceptional, the body of the valve (the bit you don't see) is cast in solid brass. The two square control handles are cast from solid brass and then chrome plated and finally you have a 5mm think solid brass backplate that is again chrome plated.
For your convenience we have combined this shower with our QL2 shower head and arm and bath filler pop up waste in one pack, the perfect solution for minimalist showering over your bath.
The back plate on this QL2 shower is 235mm high and 155mm wide, it requires a cavity depth of 64mm - 74mm to the face of your tiles. The projection of this shower from the back of the plate to the front of your handles is a maximum of 58mm.
This QL2 shower head and arm are both manufactured in solid brass and chrome plated, the head measures 200mm x 145mm and is only 10mm think. It features rub clean jets for ease of cleaning, simply rub over the jets with your fingers to clean off any limescale. The Shower arm is 400mm long.
With this shower valve the top control handle allows you to divert between the QL2 shower head and the bath filler and the bottom handle controls the temperature, although each item must be used separately. You cannot use both simultaneously.
This QL2 shower valve, QL2 shower head and bath filler pack is suitable for high and medium pressure water systems and requires a minimum operating pressure of 0.5 bar.
To add the finishing touch to your room, we recommend the matching range of QL2 basin and bath taps seen in our modern bathroom taps section.
Guaranteed for 10 years Medium Pressure 0.5bar Tapstore Quality Rating: 9 out of 10
Value For Money: 9 out of 10 |
