share this page: | | Trinity 3 Hole Wall Bath Filler
option
The Bristan Trinity traditional wall mounted bath filler tap effortlessly captures the spirit of a more genteel refined era. It's the scrupulous attention to detail that makes the difference - the fluted spout, the sculptured body, the traditional ceramic indices. But it's not just about appearances - the Trinity wall mounted bath filler tap also boasts large valves to give a faster flow rate.
The Trinity wall mounted bath filler tap is supplied without a bath waste, we recommend a choice from the selection shown in our wastes and traps section. It is suitable for both high and medium pressure water systems, we recommend a minimum operating pressure of 0.5 bar.
This Bristan Trinity traditional wall mounted bath tap is suitable for use with most baths, the projection from your wall to the centre of the spout is 180mm and it requires a depth in your wall of 60mm. For full technical details have a look at the technical information below.
To add the finishing touches to your room, we recommend the matching Trinity shower also shown in this section.
Guaranteed for 5 years  Medium Pressure 0.5bar Tapstore Quality Rating: 7 out of 10
Value For Money: 8 out of 10 |
