QL2 Shower Valve With Diverter & Stop
Our Price £394.00 inc VAT
SAVE 30% Usual Price £563.00 This QL2 thermostatic shower delivers a cutting edge design that is sure to make a statement in any contemporary bathroom, not only that the quality is exceptional, the body of the valve (the bit you don't see) is cast in solid brass. The three square control handles are cast from solid brass and then chrome plated and finally you have a 5mm think solid brass backplate that is again chrome plated.
With this shower valve the top control handle allows you to divert between two outlets, the central handle controls the temperature and the bottom handle controls a third outlet. For example you can use this shower valve to operate a fixed shower head and a shower kit with the top control (although these items must be used separately as you cannot use both simultaneously). The bottom control could operate body jets which would operate simultaneously with either item on the top control.
The back plate on this QL2 thermostatic shower is 320mm high and 155mm wide, manufactured in 5mm solid brass and then chrome plated it is excellent quality. It requires a cavity depth of 64mm - 74mm to the face of your tiles. The projection of this shower from the back of the plate to the front of your handles is a maximum of 58mm.
This QL2 shower valve is suitable for both high and medium pressure water systems and requires a minimum operating pressure of 0.5 bar.
This shower is ideal for use with our wide selection of fixed shower heads and shower kits, also seen in our showers section. Please remember if you are using this shower with a shower kit you will also need to buy a wall outlet elbow.
To add the finishing touch to your room, we recommend the matching range of QL2 basin and bath taps seen in our modern bathroom taps section.
Guaranteed for 10 years Medium Pressure 0.5bar Tapstore Quality Rating: 8 out of 10
Value For Money: 8 out of 10 | 
