New Team 10.4kW Electric shower
Our Price £146.81 inc VAT
SAVE 41% Usual Price £255.00 If you want it all and you want it now then try a New team electric shower. It heats the water you need, just when you want it.
This NT 10.4kW electric shower requires a mains cold water feed and an electrical supply cable from your consumer unit via an appropriate isolation switch.
The unique swivel "pushfit" elbow pipe connection allows your plumbing to enter the shower from the left or right hand side. If you are using the inlet connection from the left, the pipework can enter from the top, bottom or rear.If you are using the inlet connection from the right, the pipework can ONLY enter from the bottom or rear.
This Newteam electric shower features:
Indicator lights to show low incoming water pressure and when the selected temperature is too high to allow sufficient water flow through the heating elements.
Phased shut-down safety feature - the shower will continue to run on for a few seconds after being switched off. This flushes out excess hot water from the shower and reduces limescale build-up inside the unit.
Separate temperature control to ensure that your next visit to the shower needs no further adjustment and temperature stabilisation to minimise temperature fluctuation when other taps are opened.
Luxury three spray "rub clean" shower handset with a riser rail that fits flush to wall and includes an integrated hose retainer and soap tray.
This model is a direct replacement for the Showerforce SF 10.4kW, also part of the Bristan group.
We recommend this shower is installed in accordance with current IEE wiring regulations and relevant building regulations by a suitably qualified registered electrician.
Guaranteed for 2 years Minimum Pressure 1.0bar Tapstore Quality Rating: 7 out of 10
Value For Money: 9 out of 10 | 
