Tec fittings with crosshead handles are a stunning balance between old and new. Made of solid brass and then chrome plated with a smooth quarter turn action these taps and mixers speak of precision and total quality.
This mixer tap is supplied without a basin waste; we recommend a choice from our wastes and traps section. Please remember if you basin does not have an overflow you will need an unslotted waste and for a basin with overflow use a slotted waste.
The projection of this tap from the wall to the end of the spout is 220mm and the projection of the handles from the wall is 120mm. The Hudson Reed wall mounted 3 hole basin mixer is suitable for use with low and high pressure water systems and requires a minimum operating pressure of 0.2bar. To complete your room, we recommend a choice from the range of Tec thermostatic recessed shower valves.
- Additional Information
Installation Guide No Approvals WRAS Approved Basic Dimensions No Guarantee 10 Years Pipe Centres No Manufacturer Hudson Reed Minimum Recommended Pressure Low Pressure 0.2bar Valve Technology Ceramic Disc