This bath filler combined with waste and overflow has an additional benefit, it projects just 33mm from the side of your bath. It requires an additional blending valve, shower valve or hot and cold taps to provide the water control for the bath fill. If you are using your bath for bathing and showering we have a selection of thermostatic shower valves with built in diverters, these allow you to control this bath filler and your showering needs all from one single shower valve for the ultimate in ease of use and minimal design. A selection of manual shower valves are also available, please see our showers section for more details. The clicker waste is very simply operated. Press the plug down to close and press again to open each time with an audible click. This slim line overflow bath filler and clicker waste is only available in the chrome plated finish as shown and offers the following flow rates. 18 litres per minute at 0.3bar, 25 litres per minute at 0.5bar and 38 litres per minute at 1.0bar.
|Minimum Recommended Pressure||Low Pressure 0.3bar|
|Pipe Connection Size||40mm (1 1/2")|
|This product has no reviews yet.|