Details
The RS2 kitchen tap delivers the very latest in cutting edge design. Its rectangular body combines with the slim yet engineered spout and complementing streamlined lever control handle to bring you the very latest in design.
Manufactured to the highest quality, this stunning RS2 sink tap will be a welcome addition to any modern, contemporary or minimalist kitchen. It uses only the best ceramic disk cartridge to ensure you receive a smooth action time and time again.
This RS2 kitchen sink mixer is supplied without a waste, we recommend a choice from our wastes and traps section. It is supplied complete with tap connectors and all fittings for fixing to your kitchen sink or worktop. If you are fitting this kitchen tap to a worktop we recommend a 35mm diameter hole is drilled.
It’s total height is 330mm and the projection from centre of the body to centre of the spout is 200mm. For full technical details please see the technical information below.
This RS2 monobloc kitchen mixer tap with swivel spout is suitable for both medium and high pressure water systems, we recommend a minimum pressure of 0.5 bar.
Guaranteed for 10 years.
Additional Information
| Product Code | RS2155C |
|---|---|
| Basic Dimensions | The total height is 330mm and its projection from centre of the body to centre of the spout is 200mm. |
| Brand | Tapstore |
| Guarantee | 10 Years |
| Minimum Recommended Pressure | Medium Pressure 0.5bar |
| Mounting Hole Size | 35mm Diameter Hole |
| Valve Technology | Ceramic Cartridge |
-
It's okay Review by DIYFun
Your Rating The tap's design is very modern, and looks fantastic with a solid build. Installation was pretty straight foward. However, once you close the tap, it takes a few seconds for the water to completely stop flowing (i.e drips), as there is no mesh at the end of the tap. There is also a very small delay for the water to start flowing, when turned on. I would say this tap is more form than function! (Posted on 21/11/2011)





